Online educational resource on achieving indoor environmental quality with radiant based HVAC systems
Not for profit educational resource on indoor environmental quality.
 Bookmark and Share
Fundamentals of indoor environmental quality / thermal comfort and air quality solutions using radiant based HVAC

Project Cover Page
Bookmark and Share

Drawing 1. Boiler room piping and layout
Bookmark and Share

Drawing 2. Piping and control schematic
Bookmark and Share

Drawing 3. Shop tube layouts and manifold locations
Bookmark and Share

Drawing 4. Finite element analysis of tube placement
Bookmark and Share

Drawing 5. Distribution piping and manifold details
Bookmark and Share

Drawing 6. Major equipment list
Bookmark and Share

Drawing 7. Radiant design details
Bookmark and Share

Drawing 8.   Pipe expansion details, typical assemblies
Bookmark and Share

Drawing 9. Installation specifications
Bookmark and Share

Drawing 10. Dedicated outdoor air ventilation system
Bookmark and Share

Drawing 11. Dedicated air conditioning system
Bookmark and Share
 

Figure 12. 27,000 ft2 Truss Manufacturing Shop
Bookmark and Share
 

 

Figure 13. Mechanical room - two high efficiency boilers, controls and hydraulic/air separator.
Bookmark and Share
 

Figure 14. Mechanical room - two high efficiency boilers, controls and low loss header, expansion tank and office zone
Bookmark and Share
 

Figure 15. Office area tube layout and pour over tubes, rebar, insulation. See the guy on the left with the hook? He's pulling the rebar and tubes into the middle of the slab.
Bookmark and Share
 

Figure 16. Office area finished pour
Bookmark and Share
 

Figure 17. North side shop area circulator shown with circuit setter and service valves. Nice install except the inlet distance into the circulator is too short...and that's why jobs should be inspected...if you look closely at Drawing #2, we actually show the inlet distance...oh well.
Bookmark and Share
 

Disclaimer/Terms of Use:

Indoor Climate Consultants Inc. has prepared these illustrations and specifications for internal use. The information contained within reflects best judgment in light of the information available at the time of preparation. Any use which a second or third party makes of these documents, or any reliance on or decisions to be made based on the documents, are the responsibility of such parties. Indoor Climate Consultants Inc. accepts no responsibility for damages, if any suffered by individuals or firms as a result of decisions made or actions taken based on these documents. These illustrations exclusively owned by the original author, are strictly limited for the purpose of illustrating the general layout, assembly and installation of equipment for Radiant Based HVAC Systems for residential structures and commercial building classifications A through E and F3, non hazardous, non explosion proof, restricted to four stories or less. These documents shall not be copied, reproduced, or altered by any means or method, nor shall it be distributed to any individual or companies without prior written authorization from the original author. All drawings and specifications are to be considered conceptual unless approved for construction by Robert Bean, R.E.T., P.L. (Eng.) for the specified client. Unless advised otherwise, any professional stamp placed on these documents relates to the general layout and assembly only.
 

For additional support visit our visitor services page.
 

Home | Seminars | Solutions | Heating Cafe | Contribute | Online Help | Bean's Blog | About Us | Glossary
Privacy Policy | Legal | Contact Us | Site Map |
Carlson-Holohan Award| Send Us Your Comments

Copyright © 2014 Healthy Heating. All rights reserved.1 2 3
Site developed by WebworX.ca
 
Donate using PayPal, Credit Cards Accepted